Automotive Service Grease |
|
Test Description |
Method |
Required Tests: |
|
Penetration, Cone, of Lubricating Greases, Worked |
ASTM D 217.b |
NLGI Consistency Number |
NLGI |
Dropping Point, Lubricating Greases |
ASTM D 566 |
|
|
Other Optional Tests: |
|
Viscosity, Kinematic, at 40 ° C, cSt, for Base Oil |
ASTM D 445.a |
Viscosity, Kinematic, at 100 ° C, cSt, for Base Oil |
ASTM D 445.b |
Evaporation Loss of Lubricating Greases and Oils |
ASTM D 972 |
Timken Extreme Pressure (EP) Properties of Lubricating Greases |
ASTM D 2509 |
Ash Content of Petroleum Products |
ASTM D 482 |
Water Content by Karl Fischer Method, Lubricating Oils and Additives |
ASTM D 6304 |
Penetration, Cone, Lubricating Grease, Half-Scale |
ASTM D 1403 |
Roll Stability of Lubricating Grease, After 2 hours at Ambient Temperature |
ASTM D 1831 |
