Biodiesel Fuel (B 100) Blend Stock, ASTM D 6751 Specification |
|
Test Description |
Method |
Required Tests: |
|
Flash Point, Pensky-Martens Closed Cup |
ASTM D 93 |
Water and Sediment in Distillate Fuels, BS&W |
ASTM D 2709 |
Viscosity, Kinematic, at 40°C, cSt |
ASTM D 445.a |
Ash, Sulfated Residue, Lube Oils and Additives |
ASTM D 874 |
Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by UV Fluorescence |
ASTM D 5453 |
Corrosion from Petroleum Products, Copper Strip Tarnish Test, 2 hours @ 100°C |
ASTM D 130 |
Cetane Number, Ignition Quality of Diesel Fuels |
ASTM D 613 |
Cloud Point of Petroleum Products |
ASTM D 2500 |
Carbon Residue (Micro Method) |
ASTM D 4530 |
Acid Number of Petroleum Products, Potentiometric Titration |
ASTM D 664 |
Glycerine, Free and Total, in Biodiesel Fuel B 100 (Methyl Esters) by Gas Chromatography (GC) |
ASTM D 6584 |
Phosphorus Content in Biodiesel Fuels by ICP-AES |
ASTM D 4951.b |
Distillation of Petroleum Products at Reduced Pressures, 5 and 10 mm |
ASTM D 1160 |
Microbial Contamination in Fuels and Fuel Systems |
ASTM D 6469 |
Potassium and Sodium Content |
EN 14538.b |
Calcium, Magnesium Content |
EN 14538.a |
Oxidation Stability |
EN 14112 |
|
|
Additional Optional Tests: |
|
Sulfur, X-Ray Spectrometry. LOD = 0.001 wt% |
ASTM D 2622 |
Cetane Index, Calculated by Four Variable Equation (may be substituted for Cetane Number when ASTM D 613 is not available). |
ASTM D 4737 |
Particulate Contamination in Middle Distillate Fuels by Filtration |
ASTM D 6217 |
Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator, (SLBOCLE), Procedure A: Incremental Load |
ASTM D 6078.a |
Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator, (SLBOCLE). Procedure B: Single-Load Test |
ASTM D 6078.b |
Lubricity of Diesel Fuels by the High Frequency Reciprocating Rig (HFRR) |
ASTM D 6079 |
Carbon Residue, Conradson on 10% Residue |
ASTM D 189.b |
Carbon Residue, Ramsbottom on 10% Residue |
ASTM D 524.b |
Distillation of Petroleum Products at Atmospheric Pressure |
ASTM D 86.b |
API Gravity, Hydrometer Method |
ASTM D 287.a |
Cetane Index, Calculated from Distillation and API Gravity |
ASTM D 976 |
Sulfur, Lamp Method. LOD = 0.01 wt% |
ASTM D 1266 |
Water and Sediment in Fuel Oils, BS&W |
ASTM D 1796 |
Oxidation Stability, Light Fuel Oils, 16 hr |
ASTM D 2274 |
Wax Appearance Point of Distillate Fuels |
ASTM D 3117 |
Sulfur, by Microcoulometry, Light Hydrocarbons |
ASTM D 3120 |
Acidity in Aviation Turbine Fuel, Acid Number |
ASTM D 3242 |
Sulfur by X-Ray Fluorescence Spectroscopy. LOD = 0.01 wt% |
ASTM D 4294 |
