W |
|
Water and Sediment in Crude Oil, BS&W |
ASTM D 4007 |
Water and Sediment in Distillate Fuels, BS&W |
ASTM D 2709 |
Water and Sediment in Fuel Oils, BS&W |
ASTM D 1796 |
Water by Distillation, Crude Oil |
ASTM D 4006 |
Water by Distillation, Petroleum Products |
ASTM D 95 |
Water Content |
IEC 60814 |
Water Content (Moisture) of Soil by Direct Heating Method |
ASTM D 4959 |
Water Content by Karl Fischer Method |
ASTM E 203 |
Water Content by Karl Fischer Method, Antifreeze |
ASTM D 1123 |
Water Content by Karl Fischer Method, Crude Oil |
ASTM D 4928 |
Water Content by Karl Fischer Method, Halogenated Organic Solvents |
ASTM D 3401 |
Water Content by Karl Fischer Method, Insulating Liquids |
ASTM D 1533 |
Water Content by Karl Fischer Method, Lubricating Oils and Additives |
ASTM D 6304 |
Water Content by Karl Fischer Method, Organic Liquids |
ASTM E 1064 |
Water Content by Karl Fischer Method, Volatile Solvents |
ASTM D 1364 |
Water in Crude Oils by Potentiometric Karl Fischer Titration |
ASTM D 4377 |
Water Miscibility of Water-Soluble Solvents |
ASTM D 1722 |
Water Reaction of Aviation Fuels |
ASTM D 1094 |
Water Separation Characteristics of Diesel Fuels by Portable Separometer, DSEP Rating |
ASTM D 7261 |
Water Separation Characteristics of Kerosene-type Aviation Turbine Fuels Containing Additives |
ASTM D 7224 |
Water Spray Resistance of Lubricating Grease |
ASTM D 4049 |
Water Tolerance |
ASTM D 6422 |
Water Vapor Content of Gaseous Fuels by Measurement of Dew Point Temperature |
ASTM D 1142 |
Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers |
ASTM D 5454 |
Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes |
ASTM D 4888 |
Water Washout Characteristics of Greases at 38°C (100°F) |
ASTM D 1264.a |
Water Washout Characteristics of Greases at 80°C (175°F) |
ASTM D 1264.b |
Wax Appearance Point of Distillate Fuels |
ASTM D 3117 |
Wax Content in Oil (Paraffin Wax) |
UOP 46 |
Wear Metals and Contaminants in Lubricating Oils by Rotating Disc Electrode Atomic Emission Spectrometry, (RDE-AES) |
ASTM D 6595 |
Wear Preventive Characteristics of Grease, Four-Ball Method |
ASTM D 2266 |
Wear Preventive Characteristics of Lube Oil, Four-Ball Method |
ASTM D 4172 |
Wear Preventive Properties of Lubricating Greases using the Falex Block on Ring Test |
ASTM D 3704 |
Wear Properties of Fluid Lubricants, Falex Pin and Vee-Block Method |
ASTM D 2670 |
Wear Test for Hydraulic Fluids - Withdrawn 2004, No Alternative Given |
ASTM D 2271 |
