S |
|
Sag, Flow Resistance, Vertical or Overhead Joints |
FS SS-S-210A |
Salinity |
Std M 210B |
Salt Content of Crude Oil, Electrometric Method |
ASTM D 3230 |
Salt Contents of Crude Oil, Potentiometric Method |
ASTM D 6470 |
Salt, Calculated as Na and Cl |
ASTM D 1979 |
Sample Preparation of Oils and Oily Wastes by High-Pressure, High-Temperature Digestion for Trace Element Determinations |
ASTM C 1234 |
Sample Preparation of Water Samples by Acid Digestion |
ASTM D 1971 |
Sample Preparation, Acid Digestion Aqueous Extracts |
EPA 3010A |
Sample Preparation, Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water |
ASTM D 4309 |
Sample Preparation, Dissolution, Oil, Grease, Wax |
EPA 3040A |
Sample Preparation, Extraction of Total Petroleum Hydrocarbons (TPH) by Microwave Heating |
ASTM D 5765 |
Sample Preparation, Nitric Acid Digestion of Solid Waste |
ASTM D 5198 |
Sample Preparation, Purge-and-Trap, Solid Wastes |
EPA 5030B |
Sample Preparation, Sediments, Soils, Sludges, Acid Digestion |
EPA 3050B |
Sample Preparation, Soxhlet Extraction, Solid Waste |
ASTM D 5369 |
Sample Preparation, TCLP Extraction Procedure for Metals and Semi-volatiles |
EPA 1311 |
Sample Preparation, Total Digestion of Sediment Samples for Chemical Analysis of Various Metals |
ASTM D 4698 |
Sample Preparation, Total Recoverable Metals |
EPA 3005A |
Sampling for Particles in Aerospace Fluids and Components |
ASTM F 303 |
Sampling for Particulate Contamination by Tape Lift |
ASTM E 1216 |
Saponification Number |
ASTM D 94 |
SARA, Saturates, Aromatics, Resins and Asphaltenes Analysis |
TOL 5051 |
Scanning Electronic Microscope (SEM) Analysis |
TOL 5054 |
Scuffing (Scoring) Load Capacity of Oils, FZG Method |
ASTM D 5182 |
Sediment (Particulate Contamination) in Lubricating Oils (Solids Volume) |
ASTM D 2273 |
Sediment and Solid Sludge in Service-Aged Insulating Oils |
ASTM D 1698 |
Sediment by Extraction |
ASTM D 473 |
Sediment by Hot Filtration, Exxon Method |
Exxon |
Sediment by Hot Filtration, Shell Method |
Shell |
Sediment Content (Particulates/Solids) |
DuPont F3200 |
Sediment in Crude Oil by Membrane Filtration Test |
ASTM D 4807 |
Selenium in Water |
ASTM D 3859 |
Semivolatile Organic Compounds |
EPA 525 |
Semivolatile Organic Compounds by GC-MS |
EPA 8270D |
Semivolatile Organic Compounds by GC-MS Capillary Column |
EPA 8270C |
Separability Characteristics of Way Lubricants |
ASTM D 6553 |
Separability Number of Asphalt Containing Heavy Fuel Oils |
ASTM D 7061 |
Separation of Asphalt into Four Generic Fractions |
ASTM D 4124 |
Separometer Index, Water Separation Characteristics, Micro (WISM or MSEA) |
ASTM D 3948 |
Shear Stability of Fluids, European Diesel Injector Apparatus |
ASTM D 6278 |
Shear Stability of Polymer-Containing Oils, Sonic |
ASTM D 2603 |
Sieve Analysis of Coal and Designating Coal Size, per Sieve |
ASTM D 4749 |
Sieve Analysis of Coke, per sieve |
ASTM D 293 |
Sieve Analysis of Petroleum Coke, per sieve |
ASTM D 5709 |
Silica in High-Purity Water by Flameless AA |
ASTM D 4517 |
Silica in Water and Wastewater |
ASTM D 859 |
Silt Density Index of Water |
ASTM D 4189 |
Silver in Water |
ASTM D 3866 |
Simulated Distillation, SimDis, High Temperature Range, 360 - 575°C, C10 to C50 |
ASTM D 2887.d |
Simulated Distillation, SimDis, Lower Temperature Range, 55 to 538°C, C5 to C44 |
ASTM D 2887.c |
Sludging Tendencies of Inhibited Mineral Oils |
ASTM D 4310 |
Smoke Point of Kerosene and Aviation Turbine Fuels |
ASTM D 1322 |
Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy |
ASTM D 6071 |
Sodium in Water by Atomic Absorption Spectrophotometry |
ASTM D 4191 |
Sodium Salts of EDTA in Water -Withdrawn 2005, No Alternative Given |
ASTM D 3113 |
Softening Point of Bitumen by Ring-and-Ball |
ASTM D 36 |
Solidification Point of Benzene |
ASTM D 852 |
Solidification Point of Organic Chemicals |
ASTM D 6875 |
Solidification Point of Petroleum Wax |
ASTM D 3944 |
Solids, n-Heptane Insoluble, by 5 micron Millipore Filtration |
ASTM D 3279 |
Solids, Settelable |
EPA 160.5 |
Solubility of Asphalt in Trichloroethylene |
ASTM D 2042 |
Solubility of Fixed Gases in Liquids |
ASTM D 2780 |
Solubility of Gases of Petroleum and Other Organic Liquid |
ASTM D 3827 |
Solubility Water in Hydrocarbon Lubricants |
ASTM D 4056 |
Solvent Extractables in Petroleum Waxes |
ASTM D 3235 |
Solvents Analysis in Hazardous Waste Using Gas Chromatography |
ASTM D 5830 |
Sonication Extraction, Solid Wastes SW-846 |
EPA 3550B |
Soxhlet Extraction, Sludges |
EPA 3540C |
Specific Gravity (Density, Relative Density) of Petroleum Products, See API Gravity |
ASTM D 287.b |
Specific Gravity (Relative Density), Gaseous Fuel |
ASTM D 1070 |
Specific Gravity and Bulk Density of Waste |
ASTM D 5057 |
Specific Gravity and Density of Halogenated Organic Solvents |
ASTM D 2111 |
Specific Gravity and Density of Semi-Solid Bituminous Materials by Pycnometer Method |
ASTM D 70 |
Specific Gravity at 59°F and 1 atmosphere |
ASTM D 3588.d |
Specific Gravity of Liquid Chemicals, Hydrometer Method |
ASTM D 891.a |
Specific Gravity of Liquid Chemicals, Pycnometer Method |
ASTM D 891.b |
Specific Gravity of Soil Solids by Water Pycnometer |
ASTM D 854 |
Specific Gravity of Water and Brine |
ASTM D 1429 |
Specific Heat Capacity by Differential Scanning Calorimetry |
ASTM E 1269.a |
Specific Heat of Liquids and Solids |
ASTM D 2766 |
Specific Heat, Aircraft Turbine Lubricants by Differential Scanning Calorimeter (Replaces ASTM D 4816) |
ASTM E 1269.b |
Specific Resistance (Resistivity) of Electrical Insulating Liquids |
ASTM D 1169 |
Stability of Water-in-Oil Emulsions, Oven Test |
ASTM D 3707 |
Storage Stability and Compatibility |
FTM 3430 |
Storage Stability of Distillate Fuel at 43°C (110°F) |
ASTM D 4625 |
Storage Stability of Middle Distillate Fuel by Oxygen Overpressure |
ASTM D 5304 |
Strong Acid Number |
IP 139 |
Strong Acid Number, Color-Indicator Titration |
ASTM D 974.b |
Strontium-90 in Water, by ICP-MS |
ASTM D 5811 |
Sugar in Crankcase Oil |
TOL 5001 |
Sulfate Ion in Brackish Water, Seawater, and Brines |
ASTM D 4130 |
Sulfate Ion in Water |
ASTM D 516 |
Sulfate, Gravimetric |
EPA 375.3 |
Sulfate, Turbidemetric |
EPA 375.4 |
Sulfated Ash of Organic Materials by Thermogravimetry |
ASTM E2403 |
Sulfide Ion in Water by Ion Selective Electrode |
ASTM D 4658 |
Sulfide, Reactive, in Solid Wastes, mg/L |
EPA 9030B |
Sulfite |
EPA 377.1 |
Sulfur Analysis in Coal and Coke Using High Temp Tube Furnace Combustion |
ASTM D 4239 |
Sulfur by X-Ray Fluorescence Spectroscopy. LOD = 0.01 wt% |
ASTM D 4294 |
Sulfur Compounds in Light Petroleum Liquids by GC and Sulfur Selective Detection |
ASTM D 5623 |
Sulfur Compounds in Natural Gas and Gaseous Fuels by GC |
ASTM D 5504 |
Sulfur Compounds in Natural Gas and Gaseous Fuels by GC/FPD |
ASTM D 6228 |
Sulfur in Gaseous by Energy Dispensive X-ray Fluorescence Spectrometry |
ASTM D 6445 |
Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence |
ASTM D 6334 |
Sulfur in Liquefied Petroleum Gases |
ASTM D 2784 |
Sulfur in Liquid Hydrocarbons by Oxidative Combustion and Electrochemical Detection |
ASTM D 6920 |
Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry |
ASTM D 4045 |
Sulfur Total Volatile, in Gaseous Hydrocarbons and LPG |
ASTM D 6667 |
Sulfur, Bomb Method. LOD = 0.1 wt% |
ASTM D 129 |
Sulfur, by Microcoulometery, Light Hydrocarbons |
ASTM D 3120 |
Sulfur, High Temperature Method LOD = 0.06 wt% |
ASTM D 1552 |
Sulfur, Lamp Method. LOD = 0.01 wt% |
ASTM D 1266 |
Sulfur, Total, in Light Hydrocarbons, Oxidative Combustion Method |
ASTM D 6428 |
Sulfur, Total, in the Analysis Sample of Coal and Coke |
ASTM D 3177 |
Sulfur, X-Ray Spectrometry. LOD = 0.001 wt% |
ASTM D 2622 |
Surface and Interfacial Tension of Solutions of Surface-Active Agents |
ASTM D 1331 |
Surface Tension by Fast Bubble Technique |
ASTM D 3825 |
Sustained Burning of Liquids Mixtures by the Seta-Flash Tester |
ASTM D 4206 |
