P |
|
Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200°C by Multi-Dimensional Gas Chromatography |
ASTM D 5443 |
Particle Contamination in Hydraulic Fluids, SAE |
ARP 785 |
Particle Count, Automatic Optical Counter |
SAE ARP 598 |
Particle Count, Automatic Optical Particle Count |
NAS 1638 |
Particle Count, Automatic Optical Particle Count |
ISO 4406 |
Particle Size Analysis, Dry Sieve, per fraction |
ASTM E 11 |
Particle Size and Distribution by Automated Optical Laser Particle Analyzer with Customer Designated Size Partition Limits |
TOL 5052 |
Particle Size Distribution of Catalytic Material by Laser Light Scattering |
ASTM D 4464 |
Particle Size Distribution of Catalytic Material by Sieving per sieve |
ASTM D 4513 |
Particles for Emulsified Asphalts |
ASTM D 244 |
Particulate Contaminant in Aviation Fuel by Line Sampling |
ASTM D 2276 |
Particulate Contamination Analysis Using Membrane Filters |
ASTM F 311 |
Particulate Contamination in Aviation Fuels by Laboratory Filtration |
ASTM D 5452 |
Particulate Contamination in Middle Distillate Fuels by Filtration |
ASTM D 6217 |
Partition Coefficient by Liquid Chromatography |
ASTM E 1147 |
PBBs in Liquid and Solid Wastes: Oils and Sludges, etc. - Modified Method |
ASTM D 6160.b |
PCA Content |
BS 2000 Part 346 |
PCB Content |
IEC 61619 |
PCB Content, Screening Test in Oil, ppm |
TOL 5049 |
PCBs by Cap Column GC |
EPA 8082 |
PCBs by GC |
EPA 8082A |
PCBs in Insulating Oil by Gas Chromatography |
ASTM D 4059 |
PCBs in Liquid and Solid Wastes: Oils and Sludges, etc. |
ASTM D 6160.a |
PCBs in Soil by Extraction and Gas Chromatography |
EPA 8080A |
PCBs in Transformer Insulating Oils by GC |
EPA 600 |
PCBs in Water by Gas Chromatography -Withdrawn 2003, See ASTM D 6160 |
ASTM D 3534 |
PCTs in Liquid and Solid Wastes: Oils and Sludges, etc. - Modified Method |
ASTM D 6160.c |
Pendimethalin |
EPA 8141 |
Penetration, Cone, Lubricating Grease, Half-Scale |
ASTM D 1403 |
Penetration, Cone, of Bituminous Materials |
ASTM D 5 |
Penetration, Cone, of Lubricating Greases, Unworked |
ASTM D 217.a |
Penetration, Cone, of Lubricating Greases, Worked |
ASTM D 217.b |
Penetration, Needle, of Petroleum Waxes |
ASTM D 1321 |
Pentane Insolubles by Membrane Filtration |
ASTM D 4055 |
Percent Antifreeze |
TOL 5050 |
Permanganate Time of Acetone and Methanol |
ASTM D 1363 |
Peroxide Content, Trace, in Organic Solvents |
ASTM E 299 |
Peroxide Number of Aviation Turbine Fuels |
ASTM D 3703 |
Peroxides in Styrene Monomer |
ASTM D 2340 |
Petroleum Hydrocarbons, Total Recoverable (TPH) |
EPA 418.1 |
Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography |
ASTM D 5134 |
Petroleum Waxes by Gas Chromatography |
ASTM D 5442 |
Phenolics, Total Recoverable |
EPA 420.1 |
Phenols by Spectrophotometry |
EPA 420.2 |
Phosphorous in ILSAC GF-4 Engine Oils by ICP |
ASTM D 7040 |
Phosphorus Content in Biodiesel Fuels by ICP-AES |
ASTM D 4951.b |
Phosphorus in Gasoline, Gravimetric, g/gal |
ASTM D 3231 |
Phosphorus in Lubricating Oils and Additives |
ASTM D 1091 |
Physical Appearance |
Visual |
PIONA Analysis by Gas Chromatography |
ASTM D 6730 |
Poly Aromatic Compounds, PACs, DSMO Extraction |
IP 346 |
Poly Nuclear Aromatics by FID |
EPA 8100 |
Polycyclic Aromatic Hydrocarbons (PAH), Gaseous and Particulate, in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis) |
ASTM D 6209 |
Polymer Content of Styrene Monomer |
ASTM D 2121 |
Polynuclear Aromatic Hydrocarbon Compounds (PAH) |
EPA 1654 |
Polynuclear Aromatic Hydrocarbons (PAH), Wastewater, GC |
EPA 610 |
Polypropylene Contamination in Residual Fuel Oils |
TOL T 5035 |
Potassium and Sodium Content |
EN 14538.b |
Potassium in Water by Atomic Absorption Spectrophotometry |
ASTM D 4192 |
Pour Point of Crude Oils |
ASTM D 5853 |
Pour Point of Petroleum Oils |
ASTM D 97 |
Pour Point of Petroleum Oils, Automated Method |
ASTM D 5950 |
Pour Point of Petroleum Products, Automatic Pressure Pulsing Method |
ASTM D 5949 |
Pour Point, Instrumental |
ASTM D 5985 |
Precipitation Number of Lubricating Oils |
ASTM D 91 |
Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals |
ASTM D 6800 |
Proximate Analysis of Coal and Coke - Referee Methods Package |
ASTM D 3172.a |
Proximate Analysis of Coal and Coke, Instrumental - Package |
ASTM D 5142.a |
Pumpability of Industrial Fuel Oils |
ASTM D 3245 |
Purgeable Aromatics by GC |
EPA 602 |
Purgeable Halocarbons in Wastewater by GC |
EPA 601 |
Purgeable Organic Compounds in Water by Capillary Column GC-MS |
ASTM D 5790 |
Purity by Differential Scanning Calorimetry |
ASTM E 928 |
Purity of Acrylate Esters by Gas Chromatography |
ASTM D 3362 |
Purity of Aldehydes and Ketones |
ASTM D 2192 |
Purity of Hydrocarbons from Freezing Points |
ASTM D 1016 |
Purity of Methyl Ethyl Ketone by GC, Includes weight percent Alcohol |
ASTM D 2804 |
Purity of Styrene by Capillary Gas Chromatography (GC) |
ASTM D 5135 |
Pyrolysis FT-IR for Polymer Identification |
ASTM D 3677 |
![]()