O |
|
Octane Number, Motor Method |
ASTM D 2700 |
Octane Number, Research (Addition) |
ASTM D 2699 |
Odor in Water |
ASTM D 1292 |
Odor of Volatile Solvents and Diluents |
ASTM D 1296 |
Oil & Grease - Extraction for Sludge & Sediment |
EPA 9071A |
Oil and Grease Content, Gravimetric |
EPA 413.1 |
Oil and Grease Content, Sludge by Extraction |
EPA 1664 |
Oil and Grease Content, Total Recoverable - Gravimetric |
EPA 9070 |
Oil and Grease Content, Total Recoverable - referral to use Method 1664 |
EPA 9070A |
Oil Content of Petroleum Waxes |
ASTM D 721 |
Oil Separation from Lubricating Grease (Conical Sieve Method) |
ASTM D 6184 |
Oil Separation from Lubricating Grease, Bleed |
ASTM D 1742 |
Oil Spill Identification by Gas Chromatography and Mass Spectrometry |
ASTM D 5739 |
Oil Spill Source Identification by Gas Chromatography-Mass Spectrometry (GC-MS) |
ASTM D 5739.a |
Olefin Content by Supercritical Fluid Chromatography |
ASTM D 6550 |
Olefins in Spark-Ignition Engine Fuels by Multi-dimensional Gas Chromatography |
ASTM D 6296 |
Organic Chloride in Aromatic Hydrocarbons by Microcoulometry |
ASTM D 5808 |
Organic Compounds in Wastewater by GC-MS |
EPA 625 |
Organic Compounds in Water by Gas Chromatography and Mass Spectrometry (GC-MS) |
ASTM D 4128 |
Organic Compounds, Purgables, by GC-MS |
EPA 624 |
Organochlorine Pesticides in Water by Capillary Column Gas Chromatography |
ASTM D 5812 |
Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry |
ASTM E 1858 |
Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry |
ASTM D 5483 |
Oxidation Inhibitor in Insulating Oil by Gas Chromatography |
ASTM D 4768 |
Oxidation Inhibitor in Insulating Oil by Infrared Absorption |
ASTM D 2668 |
Oxidation of Gear Oils |
ASTM D 5763 |
Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry |
ASTM E 2009 |
Oxidation Reduction Potential |
Std M 2580 |
Oxidation Stability |
EN 14112 |
Oxidation Stability by Modified Rotating Pressure Vessel |
ASTM D 2272.b |
Oxidation Stability by Rotating Pressure Vessel Method, RPVOT (previously RBOT) |
ASTM D 2272.a |
Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B |
ASTM D 7098 |
Oxidation Stability of Used Lubricants by FT-IR |
ASTM D 7214 |
Oxidation Stability, Automotive Engine Oils by Thin Film Oxygen Uptake, TFOUT |
ASTM D 4742 |
Oxidation Stability, Distillate Fuels |
ASTM D 6468 |
Oxidation Stability, DuPont, including Color |
DuPont F-21 |
Oxidation Stability, Extreme Pressure Lubricating Oils |
ASTM D 2893 |
Oxidation Stability, Inhibited Steam Turbine Oils |
ASTM D 943 |
Oxidation Stability, Light Fuel Oils, 16 hr |
ASTM D 2274 |
Oxidation Stability, Lubricating Grease, Oxygen Bomb Method (Oxy Bomb) |
ASTM D 942 |
Oxidation Stability, Mineral Insulating Oil, 164 hr |
ASTM D 2440.a |
Oxidation Stability, Mineral Insulating Oil, 72 hr |
ASTM D 2440.b |
Oxidation Stability, Mineral Insulating Oils, RPVOT (previously RBOT) |
ASTM D 2112 |
Oxidation Stability, Potential Residue Method |
ASTM D 873 |
Oxidation Test for Hydraulic and Turbine Oils using the Universal Oxidation Test Apparatus |
ASTM D 5846 |
Oxidation Test for Turbine Oils, High Temperature Universal Method |
ASTM D 6514 |
Oxygen, Dissolved, by Membrane Electrode |
EPA 360.1 |
Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography |
ASTM D 6293 |
Oxygenates in Gas by Gas Chromatography |
ASTM D 5599 |
Oxygenates, Benzene, Toluene, C8-C12 Aromatics in Finished Gasoline by GC |
ASTM D 5986 |
