M |
|
Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry |
ASTM D 6349 |
Manganese in Gasoline by AA Spectrometry |
ASTM D 3831 |
Maximum Size of Particulates in Gas, um |
TOL SC 6028.b |
Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuels |
ASTM D 5705 |
Melting Point of Petroleum Wax |
ASTM D 87 |
Melting Point of Petroleum Wax and Petroleum, Drop Melting Point |
ASTM D 127 |
Mercaptan Sulfur in Gasoline, Kerosene and Distillate Fuels |
ASTM D 3277 |
Mercaptan Sulfur, Potentiometric Method |
ASTM D 3227 |
Mercaptans in Natural Gas Using Length of Stain Detector Tubes |
ASTM D 1988 |
Mercury by Cold Vapor Atomic Absorption, Limit of Detection. LOD = 0.05 ppm |
EPA 7040A |
Mercury by Cold Vapor Atomic Absorption, LOD = 0.05 ppm |
EPA 245.1 |
Mercury, by Cold Vapor Atomic Absorption, Liquid Waste |
EPA 7470A |
Mercury, by Cold Vapor Atomic Absorption, Solid Waste |
EPA 7471A |
Mercury, Total, in Coal by Acid Extraction/Cold Vapor AA |
ASTM D 6414 |
Mercury, Total, in Coal by Direct Combustion Analysis |
ASTM D 6722 |
Mercury, Total, in Coal by Oxygen Bomb Combustion |
ASTM D 3684 |
Mercury, Total, in Water |
ASTM D 3223 |
Metal removal Fluids by Tapping Torque Test |
ASTM D 5619 |
Metals Analysis,Examination of Water and Wastewater |
Std M 3110 |
Metals and Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry |
ASTM D 6728 |
Metals by Atomic Absorption (AA). LOD = 0.05 ppm, per element |
EPA 7000A |
Metals by Graphite Furnace Atomic Absorption Spectroscopy, GFAAS. Includes: Vanadium, Sodium, Potassium, Lithium, Lead, and Calcium. LOD = 0.01 ppm |
ASTM E 1184 |
Metals by ICP-AES, Semi-Quantitative Scan, 27 metals |
ASTM E 1613.a |
Metals by Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-AES), on Soils, Sludge, Solids, and Petroleum Products. Includes: Arsenic, Cadmium, Chromium, and Lead. Limit of Detection. LOD = 1 ppm |
EPA 6010B.1 |
Metals Content |
EN 14538 |
Metals Detection by X-Ray Diffraction |
TOL 5053 |
Metals in Compounding Materials, Flame AA, per element |
ASTM D 4075 |
Metals in Drinking Water Surface Waters or Industrial Wastewater, by ICP-AES |
ASTM D 1976 |
Metals in Gas Oils by AAS; V, Fe, Pb, Cu, Na |
UOP 848 |
Metals in Lubricating Greases by ICP-AES |
ASTM D 7303 |
Metals in Petroleum Coke by Inductively Coupled Plasma Atomic - Emission Spectrometry (ICP-AES) |
ASTM D 5600 |
Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy |
ASTM E 885 |
Metals in Water by Inductively Coupled Plasma - Mass Spectrometry, per element |
EPA 6020 |
Methanol Content |
ASTM D 1152 |
Methanol Content |
EN 14110 |
Methanol in Crude Oil by Gas Chromatography |
ASTM D 7059 |
Methanol in LPG by GC |
UOP 845 |
Methyl Tert-Butyl Ether (MTBE) in Gasoline by Gas Chromatography |
ASTM D 5441 |
Microbial Contamination in Fuels and Fuel Systems |
ASTM D 6469 |
Micro-Organism Culture Study in Fuel Oils, bacteria count/mL |
ASTM E 1259 |
Microscope Examination and Microphotography |
TOL 7074 |
Microscopical Sizing, Counting Particles from Aerospace Fluids on Membrane Filters |
ASTM F 312 |
Moisture in the Analysis Sample of Coal and Coke |
ASTM D 3173 |
Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
ASTM D 2974 |
Moisture, As-Received Basis, Calculated from As-Determined Basis |
ASTM D 3180.b |
Moisture, Dry Basis, Calculated from As-Determined Basis |
ASTM D 3180.a |
Moisture, Total, by Oven Drying at 107°C, wt% |
ASTM D 2013 |
Moisture, Total, in Coal |
ASTM D 3302 |
Moisture, Total, in Coal Reduced to 2.36 mm. Top size |
ASTM D 2961 |
Molecular Mass of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure |
ASTM D 2503 |
Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High-Performance Size-Exclusion Chromatography |
ASTM D 5296 |
Molecular Weight from Viscosity Measurements |
ASTM D 2502 |
Molybdenum in Water |
ASTM D 3372 |
Monomethyl Ether of Hydroquinone (MEHQ) in Acrylate Esters and Acrylic Acid |
ASTM D 3125 |
MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 in Gasoline by GC |
ASTM D 4815 |
