F |
|
Falex Pin and Vee-Block Test for Load Carrying Capacity of Solid Film Lubricants |
ASTM D 2625 |
Fatty Acid Methyl Ester |
EN 14078 |
Ferrography, Analytical |
Atlas.a |
Ferrography, Direct Reading and Analytical (Trend) |
Atlas.b |
Filter Flow of Aviation Fuels at Low Temperature |
ASTM D 4305 |
Filter Plugging Tendency of Distillate |
IP 387 |
Filter Plugging Tendency of Distillate Fuel Oils |
ASTM D 2068 |
Filterability of Diesel Fuels by Low Temperature Flow Test (LTFT) Method |
ASTM D 4539 |
Filterability of Middle Distillate Fuel Oils |
ASTM D 6426 |
Filterable and Nonfilterable Matter in Water |
ASTM D 5907 |
Fire Point, Cleveland Open Cup |
ASTM D 92.b |
Fixed Carbon |
ASTM D 3174.b |
Fixed Carbon, Calculated |
ASTM D 388 |
Flame Atomic Absorption Spectro (Consolidate FLAA). LOD = 0.05 ppm, per element |
EPA 7000B |
Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids |
ASTM D 5306 |
Flammability of Chemicals, Upper and Lower Limits |
ASTM E 681 |
Flash Point |
DIN 51 755 |
Flash Point and Fire Point, Cleveland Open Cup |
ASTM D 92.c |
Flash Point by Small Scale Closed Cup Tester, (Ramp Method) |
ASTM D 7236 |
Flash Point of Liquids by Small Scale Closed Cup Apparatus (Seta-Flash) |
ASTM D 3278 |
Flash Point, Cleveland Open Cup |
ASTM D 92.a |
Flash Point, Continuous, by Closed Cup |
ASTM D 6450 |
Flash Point, Pensky-Martens Closed Cup |
ASTM D 93 |
Flash Point, Small Scale Closed Tester, Seta-Flash |
ASTM D 3828 |
Flash Point, Tag Closed Tester |
ASTM D 56 |
Flash Point, Tag Open Cup |
ASTM D 1310 |
Flash Point, Tag Open Cup, Cutback Asphalt |
ASTM D 3143 |
Flocculation Ratio and Peptizing Power of Asphaltenes in Residual and Heavy Fuel Oils |
ASTM D 7060 |
Flock Point, Refrigerant Compressor Oil |
FTM 1303.1 |
Fluidity of Hydraulic Fluids at Low Temperature |
ASTM D 6351 |
Fluoride Content, Ion Selective Electrode |
EPA 340.2 |
Fluoride Ion in Water |
ASTM D 1179 |
Fluoride Ions in Brackish Water, Seawater, and Brines |
ASTM D 3868 |
Fluorine, Total, in Coal by Oxygen Bomb Combustion |
ASTM D 3761 |
Foam in Aqueous Media (Blender Test |
ASTM D 3519 |
Foaming Characteristics of Lubricating Oils, High Temperature |
ASTM D 6082 |
Foaming Tendencies of Engine Coolants |
ASTM D 1881 |
Foaming Tendencies of Engine Coolants at Room Temperature, shake test |
ASTM D 4921 |
Foaming Tendencies of Lubricating Oils |
ASTM D 892 |
Fractionation of Petroleum Distillates |
UOP 79 |
Free Water and Particulate Contamination in Distillate Fuels |
ASTM D 4176.a |
Free Water and Particulate Contamination in Mid-Distillate Fuels |
ASTM D 4860 |
Free Water Content, Visual Method |
ASTM D 1835.a |
Freezing Point of Aqueous Engine Coolants |
ASTM D 1177 |
Freezing Point of Aqueous Engine Coolants, Refractometer Method |
ASTM D 3321 |
Freezing Point of Aviation Fuels |
ASTM D 2386 |
Freezing Point of Aviation Fuels, Automatic Laser Method |
ASTM D 7153 |
Freezing Point of Aviation Fuels, Automatic Optical Method |
ASTM D 5901 |
Freezing Point of Aviation Fuels, Automatic Phase Transition Method |
ASTM D 5972 |
Freezing Points of High Purity Hydrocarbons |
ASTM D 1015 |
Fretting Wear Protection by Lubricating Greases and Fluids |
ASTM D 4170 |
Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids |
ASTM D 5275 |
Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography |
ASTM D 5837 |
Furfural Content |
IEC 61198 |
