E

Elastomer Compatibility of Lubricating Greases and Fluids

ASTM D 4289

Elastomer Compatibility, Hardness and Relative Volume Change

ASTM D 471

Electrical Conductivity and Resistivity of Water

ASTM D 1125

Electrical Conductivity of Liquid Hydrocarbons

ASTM D 4308

Electrical Conductivity, Aviation Fuels

ASTM D 2624

Electrical Conductivity, Water and Wastewater

EPA 120.1

Elemental Analysis Coal and Coke Ash by AA

ASTM D 3682

Elemental Analysis of Lubricants and Additives per element

ASTM D 4927

Emulsion Characteristics of Lubricating Oils (Water Separability)

ASTM D 1401

Engler Specific Viscosity of Tar Products

ASTM D 1665

Epoxy Content of Epoxy Resins

ASTM D 1652

Ester Content

EN 14103

Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography

ASTM D 5501

Ethylene and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography

ASTM D 2505

Ethylene Glycol Based Engines Coolants (request detailed quote)

ASTM D 3306

Ethylene Glycols and Propylene Glycols by Gas Chromatography

ASTM E 202.b

Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids

ASTM E 979

Evaporation Loss of Lubricating Greases

ASTM D 2595

Evaporation Loss of Lubricating Greases and Oils

ASTM D 972

Evaporation Loss of Lubricating Oils by the Noack Method

ASTM D 5800

Evaporation Loss of Lubricating Oils by ThermoAnalizer (Noack Method)

ASTM D 6375

Evaporation Loss of Lubricating Oils, Noack Test

DIN 51.581

Evaporation Rate of Volatile Liquids, Relative to Butyl Acetate = 1

ASTM D 3539

Extractible Organic Halides (EOX) in Solids

EPA 9023

Extraction Procedure (EP) Toxicity Test Method

EPA 1310A

Extraction Procedure for Oily Wastes

EPA 1330A

Extraction Procedure, Zero-Head Space, Purgables

EPA 3810

Extreme Pressure Properties of Greases, Four-Ball

ASTM D 2596

Extreme Pressure Properties of Lubricants, Falex Pin and Vee-Block

ASTM D 3233

Extreme-Pressure Properties of Fluids, Four-Ball

ASTM D 2783

Extreme-Pressure Properties of Fluids, Timken

ASTM D 2782