C |
|
Cadmium in Water |
ASTM D 3557 |
Calcium and Magnesium in Water |
ASTM D 511 |
Calcium, Magnesium Content |
EN 14538.a |
Calcium, Magnesium, Potassium, and Sodium by Flame AA Spectrometry |
ASTM D 5086 |
Calculated Results 1 |
Calculated.1 |
Calculated Results 2 |
Calculated.2 |
Calculated Results 3 |
Calculated.3 |
Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis |
ASTM D 2598 |
Calorific Value and Specific Gravity of Gaseous Fuels |
ASTM D 3588.a |
Calorific Value, Gross, of Coal and Coke |
ASTM D 5865 |
Calorific Value, Gross, of Coal and Coke - Discontinued Method, See ASTM D 5865 |
ASTM D 3286 |
Carbon and Hydrogen in the Analysis Sample of Coal and Coke |
ASTM D 3178 |
Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M |
ASTM D 3238 |
Carbon Number Distribution of Paraffins, Naphthenes and Aromatics by GC |
UOP 870 |
Carbon Residue (Micro Method) |
ASTM D 4530 |
Carbon Residue, Conradson |
ASTM D 189.a |
Carbon Residue, Conradson on 10% Residue |
ASTM D 189.b |
Carbon Residue, Ramsbottom |
ASTM D 524.a |
Carbon Residue, Ramsbottom on 10% Residue |
ASTM D 524.b |
Carbon, Hydrogen, and Nitrogen in Petroleum Products, Instrumental |
ASTM D 5291.a |
Carbonizable Substances in White Mineral Oil |
ASTM D 565 |
Carbonized Matter |
ASTM E 346 |
Carbonyl by HPLC |
EPA 554 |
Carbonyl Compound Trace, with 2,4-Dinitrophenylhydrazene |
ASTM E 411 |
Carbonyl Compounds by HPLC |
EPA 8315 |
Carbonyl Content |
UOP 624 |
Carbonyls in C4 Hydrocarbons |
ASTM D 4423 |
Cation Exchange Capacity, CEC |
EPA 9080 |
Cavitation Corrosion and Erosion Characteristics of New Aluminum Pumps With Engine Coolants |
ASTM D 2809 |
Cetane Index, Calculated by Four Variable Equation |
ASTM D 4737 |
Cetane Index, Calculated, Includes API Gravity & Distillation |
ASTM D 976 |
Cetane Number, Ignition Quality of Diesel Fuels |
ASTM D 613 |
Characterization of Fluorocarbon Refrigerants, GC |
DuPont F3205.a |
Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate and Sodium Ions |
ASTM C 871 |
Chemical Oxygen Demand, COD (High-Level, Saline) |
EPA 410.1 |
Chloramines by Standard Method |
Std M 4500-CI-G |
Chloride and Other Ions in Engine Coolants by Ion Chromatography |
ASTM D 5827 |
Chloride in Aqueous Sample |
EPA 9212 |
Chloride in Coal |
ASTM D 2361 |
Chloride in Refinery Waters |
UOP 456 |
Chloride in Refrigerants |
BB-F-1421 B.e |
Chloride in Water, Titrimetric, Mercuric Nitrate |
EPA 325.3 |
Chloride Ion in Engine Coolants |
ASTM D 3634 |
Chloride Ions by Ion Chromatography |
ASTM D 5542.a |
Chloride Ions in Brackish Water, Seawater & Brine |
ASTM D 4458 |
Chloride Organic and Inorganic, in Hydrocarbons |
UOP 588 |
Chloride, Inorganic, and Sulfate in Insulating Oil |
ASTM D 878 |
Chloride, Inorganic, in Water and Wastewater |
ASTM D 512 |
Chloride, Organic, in Crude Oil |
ASTM D 4229 |
Chloride, Total, by Microcoulometery |
EPA 9076 |
Chloride, Total, in Coal by Oxygen Bomb Combustion |
ASTM D 4200 |
Chlorides, Organic, in Crude Oil (Naphtha Cut) |
ASTM D 4929 |
Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector |
ASTM D 5137 |
Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector (GC ECD) |
ASTM D 5317 |
Chlorine (Total Halogens) in New and Used Oils, Bomb Method |
ASTM D 808 |
Chlorine in New and Used Lubricants |
ASTM D 1317 |
Chlorine in Used Petroleum Products, Field Method |
ASTM D 5384 |
Chlorine, Total Residual |
EPA 330.2 |
Chromium in Paint by AA Spectroscopy |
ASTM D 3718 |
Chromium, Hexavalent, Dissolved (AA, Furnace) |
EPA 218.5 |
Clay-Gel Separation Test, Chromatographic Method for Characterizing Process Oils |
ASTM D 2007 |
Cleanliness and Compatibility of Residual Fuels by Spot Test |
ASTM D 4740 |
Cleanliness Test, Automated Particle Count |
SAE 749-D |
Cleanliness Test, Microscope Examinations |
SAE 42067 |
Cleanliness Test, Millipore Examinations |
MIL 565 |
Cloud Point of Petroleum Products |
ASTM D 2500 |
Cloud Point of Petroleum Products (Constant Cooling Rate Method) |
ASTM D 5773 |
Cloud Point of Petroleum Products (Linear Cooling Rate Method) |
ASTM D 5772 |
Cloud Point of Petroleum Products, Stepped Cooling Method |
ASTM D 5771 |
Cobalt in Water |
ASTM D 3558 |
Coefficient of Friction of Lubricants, Four-Ball |
ASTM D 5183 |
Cold Filter Plugging Point of Diesel and Heating Fuels, CFPP |
ASTM D 6371 |
Cold Filter Plugging Point, CFPP |
IP 309 |
Coliform, Total (72 hour) |
EPA 9131 |
Collection and Microscopical Sizing, Counting of Particulates in Gas |
TOL SC 6028.a |
Color of Dyed Aviation Gasolines |
ASTM D 2392 |
Color of Halogenated Organic Solvents, Platinum-Cobalt Scale |
ASTM D 2108 |
Color of Petroleum Products by Tristimulus Method |
ASTM D 6045 |
Color of Transparent Liquids, Gardner Color Scale |
ASTM D 1544 |
Color, APHA, Platinum-Cobalt Scale |
ASTM D 1209 |
Color, ASTM Color Scale |
ASTM D 1500 |
Color, Saybolt Chromometer Method |
ASTM D 156 |
Color, Visual |
ASTM E 1478 |
Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy |
ASTM D 3414 |
Compatibility of Additives with Aviation Fuels |
ASTM D 4054 |
Compatibility of Mixtures of Turbine Lubricating Oils |
ASTM D 7155 |
Component Analysis of Spark Ignition Fuels by Gas Chromatography |
ASTM D 6733 |
Composition Breakdown (C1 to C40) by GC, Sludge |
ASTM D 2887.b |
Composition breakdown by GC-MS |
ASTM D 5739.b |
Composition Breakdown, Gas Chromatography |
EN 14105 |
Composition of Gases by Mass Spectrometry |
ASTM D 2650 |
Composition of Insulating Oils, Carbon Type |
ASTM D 2140 |
Composition of Liquid Petroleum (LP) Gas and Propane by GC |
ASTM D 2163 |
Composition of Lubricating Grease |
ASTM D 128 |
Composition of Natural Gas by Gas Chromatography |
ASTM D 1945.a |
Composition of Natural Gas by Gas Chromatography (TCD/FID) |
GPA 2216 |
Composition of Natural Gas by Gas Chromatography, extended |
ASTM D 1945.b |
Composition of Natural gas by Gas Chromatography, extended to C14 |
GPA 2286 |
Composition of Reformed Gas by Gas Chromatography |
ASTM D 1946 |
Composition of Waterborne Oils |
ASTM D 3415 |
Cone Penetration of Petrolatum |
ASTM D 937 |
Congealing Point of Petroleum Waxes |
ASTM D 938 |
Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method) |
ASTM D 6482 |
Cooling Characteristics of Quench Oils |
ASTM D 6200 |
Cooling Characteristics of Quenchants by Cooling Curve Analysis, (Drayton Unit) |
ASTM D 6549 |
Copper Content by Atomic Absorption or GFAA |
ASTM D 1688 |
Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry |
ASTM D 6732 |
Corrosion from Industrial Aromatic Hydrocarbons, Copper Strip Tarnish Test |
ASTM D 849 |
Corrosion from Petroleum Products, Copper Strip Tarnish Test, 2 hours @ 100°C |
ASTM D 130 |
Corrosion from Petroleum Products, Disposable Copper Foil Strip |
ASTM D 7095 |
Corrosion per NACE Standard TM-01-72 |
NACE TM-01-72 |
Corrosion Preventive Properties, Greases |
ASTM D 1743 |
Corrosion Test for Engine Coolants |
ASTM D 1384 |
Corrosion Testing of Engine Coolants, Simulated Service Test |
ASTM D 2570 |
Corrosion Testing of Metals |
ASTM G 31 |
Corrosion, Copper Strip, Liquefied Petroleum Gas |
ASTM D 1838 |
Corrosion, Copper Strip, Lubricating Greases |
ASTM D 4048 |
Corrosion, Test Metal Specimens (Request Quote) |
ASTM G 4 |
Corrosive Silver in Electrical Insulating Oil |
DIN 51353 |
Corrosive Sulfur in Electrical Insulating Oil |
ASTM D 1275 |
Corrosive Sulfur in Electrical Insulating Oil - Part A |
ASTM D 1275.a |
Corrosive Sulfur in Electrical Insulating Oil - Part B (48 hrs) |
ASTM D 1275.b |
Corrosiveness of Diesel Engine Oil at 135°C |
ASTM D 6594 |
Corrosivity Toward Steel, Coupon |
EPA 1110 |
Corrosivity, NACE Standard TM-01-69 |
NACE TM-01-69 |
Corrosivity, pH by Glass Electrode |
EPA 9045C |
Crude Oil Classification, Bureau of Mines Index |
BMCI |
Crude Oil Classification, Paraffinic or Asphaltinic |
TOL 5048 |
Crude Oil Contamination in Non-Aqueous Drilling Fluids by GC-MS |
EPA Appendix C |
Cyanide in Water |
EPA 335.1 |
Cyanide, Reactive |
EPA 9010B |
Cyanide, Total, Solid Waste |
EPA 9012A |
